Your browser is out-of-date

Some parts of the site may not work correctly until you update to the latest version Update browser now

×

Movi Pro Ignite TB-50 Ready Rig Teradek Follow Focus Monitor

$249 day
$747 week

Details

The Movi Pro has been given a whole new look with Ignite Digi Tech. Thanks to Tom Waugh! The Movi Pro can now be powered with TB-50 batteries (same as Ronin 2). This triples the run time of the Movi and allows Red or Arri to be powered through p-tap as well for the same amount of time as the usual batteries last, just to power the gimbal. This package also comes with the Tilt Cage Offset. The alternative way to mount the Movi cage, makes the tilt a counter to any front heavy lenses. So now it is possible to really stack the weight with a front heavy lens and the Movi will be ready! Since having a payload of about 25 pounds is possible, I have included counterweights which can be mounted to the tilt cage as well with the accessories mounts! They make the gimbal useable with nearly any payload!0! Movi Pro comes with: -Jason Case -4 TB-50 Batteries & Charger/Cable -2 P Tap to 6-Pin Red Power Cable -P Tap to 8-Pin Arri Power Cable -Lemo 31” cable (if needed) -Mimic Remote Top Handle -Movi Pro Wrenches -PS4 Controller Cable -2X 30mm rod clamp -4x 25mm rod clamp -2x 8 oz and 2x 11 oz counterweights, 2X 16 oz and 2X 35 oz couterweights For optimal balance, know that you should be able to point the camera in any direction and have it stay there with everything set up. In my experience, the Movi is designed to be ready for the balance to be even a little bit low. That's because the roll axis is so strong. Comes with a Ready Rig with Pro Arms and Spindles. Just attach the arms, clip on the two straps in tight. Make sure the shoulder arch goes above the operator's shoulders. Otherwise, he will be feeling unnecessary pressure! Because that's what the Ready Rig alleviates. The Movi Pro is about half the weight of the Ronin 2. For that, it can be easier to travel with. The pro arms on the ready rig are strong and retractable so you can get the length appropriate. The Teradek Bolt 300 is meant to be pointed straight up and casts a signal of up to 300'. It has both hdmi and sdi ports so options are available. The monitor is ideally an sdi option. If hdmi is required, it can accommodate with a converter to ypbpr. Any monitor can be included with the rental: 17 or 26", Shogun or Small HD. The Tilta Nano Wireless Follow Focus has a thumbwheel and a motor to pull the focus. The thumbwheel can be mounted to the Movi Pro, or handled by an operator. Set the thumbwheel and motor the the exact same channel and hold calibrate on the thumbwheel. The motor will now calibrate close focus and infinity for you to pull freely. Three batteries and two p tap power cables are included. 90 degree micro usb extenders are encouraged to decrease the likelihood of breakage to the, ever so small, micro usb port. Thank you, hope to rent to you soon.
Read More

Specs

  • Brand:
    Freefly Systems
  • Model:
    MoVI Pro Handheld 3-Axis Motorized Gimbal Stabilizer
  • Replacement Value:
    $15,000

Cancellation Policy

Your card will be charged when the owner accepts your request. Cancel within 2 hours of acceptance and you will receive a full refund. Cancel within 48 hours of the rental start date and you will receive a 50% refund. Cancel within 24 hours of the rental start date and the rental may be non-refundable. Cancellation fees are imposed at owner's discretion.


Owner Info

JB Camera Production & Rentals
100% Positive
100% Acceptance Rate

Listing Location


$249 day
$747 week