Multiple sets available upon request.
A smart control system where Infrared remote, wireless DMX and app work together
to enable big setups that can be set up, monitored and adjusted in a fast and convenient way.
App control (UHF)
Create complex programs out of colors, effects, and settings. The AX1 Wireless PixelTube will remember and repeat these effects without requiring a constant wireless link.
Quickly create groups of lights, assign positions and select which the PixelTube should receive commands.
Keep a complete overview of the status and all settings of your PixelTube while you operate them.
View battery status, radio signal, DMX address and which lights you have targeted.
Diagnose individual PixelTube or Astera Event Spotlights and even get informed if a light is being moved or switched off.
This works while you control lights by the app but also if AX1 PixelTubes are controlled via DMX.
Set up your PixelTube conveniently out of the distance.
Set DMX address and DMX footprint for one or several PixelTubes or Wireless Event Spotlights; 50 units can be prepared in less than 5 minutes out of the distance.
After your job, do a quick master reset of all settings or a partial one of only selected settings.
Wireless DMX (2.4GHz)
The AsteraBox works as a wireless DMX transmitter; just connect it with the included XLR adapter to your DMX console and you can transmit 1 DMX universe with CRMX technology, the most stable wireless DMX protocol available.
Astera Wireless PixelTubes can be controlled by LumenRadio CRMX transmitters and also by W-DMX from wireless solutions (up to G4S).
These Battery Operated Entertainment Lights support both wireless DMX standards so you can use them together with almost all other wireless lights and transmitters.
IR Remote Control
Simple commands like ON/OFF, colors, preloaded effects etc can be sent with our infrared remote control directly to the lights.
When programming lights with the AsteraApp the IR remote can be used for confirming settings on individual lights.
Unique Astera Features
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.
Set the length of your event and be sure that your lights won’t run out while still getting the maximum brightness.
100% color consistency through any batch. It can hit exact color temperatures and reproduce standard filter gels.
Scrambled PWM technology to avoid flickering when filming, green/purple balance to minimize post-production work.
The lights give visual and audible alarm and send notification to the AsteraApp if they are being moved during an event.
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.
Switch lights into power-saving standby and schedule them to wake up when the event starts.
The dynamic power-boost feature enables the light to display the maximum brightness at all times and intensify non-white colors.
Switches automatically to white light and runs of its battery when AC power is cut off.
AX1 Pixeltube 8-Tube Kit
Cancel before a request is accepted, or within 2 hours of making the request and your cancellation is FREE. Cancel within 48 hours of your rental start date and you will receive a 50% refund. Cancel within 24 hours of your rental start date and the rental may be non-refundable. Cancellation fees are imposed at owner's discretion.