Welcome to ShareGrid! Get $20 off your first rental.

Welcome to ShareGrid! Get $20 off your first rental.

Package - Shoulder Mount/Follow Focus/Matte Box

Package - Shoulder Mount/Follow Focus/Matte Box

$60
/day or weekend
$180
/week
  • Pickup & return days are free.
  • Weekends count as one day.
  • One-day minimum.
  • Rent 4-6 days per week, pay only for 3!
  • Learn More
$60 day / weekend
$180 week
138 Views

Details

PACKAGE DEAL - Tilta TT 03 Shoulder Mount/Follow Focus/Hand Grips - Cinematics Matte Box with polarizing filter Baseplate & Dovetail Plate - The baseplate features two components, a removable sliding baseplate for mounting the camera and a dovetail plate for the shoulder pad and tripod attachment Sliding Baseplate - The sliding baseplate features both 1/4"-20 and 3/8"-16 captive stainless steel camera tie-down screws and an adjustable DSLR brace that locks your DSLR in place and prevents it from twisting after you have mounted it. You can remove the DSLR brace and use the 3/8"-16 tie-down to mount larger cameras such as the XF305 or even a RED to the baseplate. Dovetail Plate - The dovetail plate provides four inches of travel for the sliding baseplate and features spring loaded safety catches. It features a Sony V-lock mount that interfaces with a Sony VCT-U14 Tripod Adapter, and the V-lock is tapped with both a 1/4"-20 and 3/8"-16 threaded mounting hole, so you can attach your own quick release plate to use with your tripod. The shoulder pad is made from a non-reversible rigid foam that is contoured to fit on the camera operators right shoulder and has two and a quarter inches of forward/back adjustment for balance. Rod Supports - The front mounted 15mm LWS rod clamps are vertically adjustable, which allows you to adjust the rod to lens height for aligning matte boxes and other rod-mounted accessories to cameras with non-standard lens mount heights. On the back of the dovetail plate is an under-slung cold shoe mount and a second 15mm rod clamp, with up to an inch of vertical adjustment, for adding available rods and rod accessories. The rod clamp levers are all "kipping" levers, which means they are spring loaded so you can reset them to fully open or lock them even if you can't rotate the lever fully because of interference by other gear. 4 x 4 Aluminum Matte Box - Lightweight Construction - Swing Away Design The swing-away design allows you to quickly move the matte box out of the way to check or change lenses, without having to remove the matte box from the support rods. This way you don't have to hand off the matte box to someone else, hold it under an arm or between your knees, or hang it under the rods while you work, greatly speeding your workflow and reducing the chance of dropping the matte box or having a filter tray fall out. - Rotating 4 x 4 Filter Tray, with one stationary filter tray The matte box an independently rotating 4 x 4 filter tray; this allows you to simultaneously rotate a filters, such as one polarizer, while keeping one stationary for creative freedom. Top & Side Flags - The removable top and side flags provide you additional flare control and attach to the matte box with a lockable-hinged assembly. This allows you to precisely set your flags to match the edge of frame for different lenses and lock them in place so that they don't move during the shot. Follow Focus Unit - The included follow focus unit snaps on and locks to 15mm LWS rods. It features a variable tension adjustment and two adjustable hard stops, which comes in handy when working with lenses that feature unlimited focus rotation and effortless movement. This allows you to add a comfortable amount of drag to your focus knob, and the hard stops allow you to make rapid focus pulls with repeatable accuracy. When working with lenses that feature their own internal focus stops, you can use the hard stops to give you a beginning and end to a snap focus pull, lessening the risk of over shooting and "pinning" the end of the lens and damaging it. The focus-marking disk is angled, making it easier to see your marks from behind the camera or from the operators position. It includes a 12" focus whip, crank handle and 5 removable lens gear rings
Read More

Specs

  • Replacement Value:
    $1,000

Cancellations

Cancel before a request is accepted, or within 2 hours of making the request and your cancellation is FREE. Cancel within 48 hours of your rental start date and you will receive a 50% refund. Cancel within 24 hours of your rental start date and the rental may be non-refundable. Cancellation fees are imposed at owner's discretion.


Member Info

Jon DAvolio
100% Positive
Accepts within an hour
79% Acceptance Rate

Item Location


$60
/day or weekend
$180
/week
  • Pickup & return days are free.
  • Weekends count as one day.
  • One-day minimum.
  • Rent 4-6 days per week, pay only for 3!
  • Learn More
$60 day / weekend
$180 week
138 Views