2K Junior Tungsten Fresnel. High quality made by Altman. Includes combo stand, sand bag, 50' stinger and barn doors. Requires a 20 amp outlet. I use this light as an excellent source of fill for most if not all of my scenes. A similar source of light would be an HMI Here is an HMI kit: 2X HMI 1.2K ($42) - https://www.sharegrid.com/losangeles/l/90887?type=rent Here are other Fresnel kits: 5 Light Arri Kit (1K, 2X 650, 300, 150) ($65) - https://www.sharegrid.com/losangeles/l/90382?type=rent 3 Light Arri Kit (650, 2X 300) ($39) - https://www.sharegrid.com/losangeles/l/103646?type=rent 2K Fresnel ($29) - https://www.sharegrid.com/losangeles/l/110482?type=rent Here are other LED kits: 2X Aputure 300D ($59 / $49 without V-Locks or softbox $39 with neither V-Locks or softbox) - https://www.sharegrid.com/losangeles/l/175619?type=rent 2X Aputure 120D ($49 / $39 without V-Locks or softbox $29 with neither V-Locks or softbox) - https://www.sharegrid.com/losangeles/l/175631?type=rent 2X Dracast (LED Battery Powered) ($44) - https://www.sharegrid.com/losangeles/l/121549?type=rent 4X Neewer LED Lights (2X - $20 / 4X - $39) - https://www.sharegrid.com/losangeles/l/92576?type=rent The big differences between the 2K fresnel and the HMI is that the 2K is orange light, the HMI is blue. Both can be gelled but they both lose light when you do so, but also the 2K fresnel can be dimmed. The dimmer can be viewed here: (https://www.sharegrid.com/losangeles/l/110484?type=rent) I package the two together here: https://www.sharegrid.com/losangeles/l/110483?type=rent